Kambrook KT460, Instruction Booklet

8

Before First Use

Before first use, remove any 

packaging material and promotional 

labels before using your toaster for the 

first time.
1.  Place the toaster on a dry, level 

heat resistant surface.

2.  Fully unwind the power cord and 

insert power cord into a 230V or 

240V power outlet and switch on 

at the power outlet.

3.  Place 1 slice of bread into each 

toasting slot.

4.  Select the desired browning 

setting using the variable 

browning control dial. Settings 

range from ‘1’ being the lightest 

to ‘7’ being the darkest. It is 

recommended for first time use, 

that the control is to be set to 

setting number ‘3’. If toasting 

less than 4 slices of bread, the 

browning setting may need to  

be reduced to avoid burning  

the toast.

5.  Press the carriage control lever 

down, ensuring it is locked  

in position.

6.  Once the browning process is 

complete and desired toast  

colour is achieved, the carriage 

control lever will automatically 

raise the toast.

NOTE:

 The toasting process 

can be stopped at any time by 

pressing the CANCEL button or 

switching off at the power outlet.

Using Your Kambrook Toaster

NOTE:

 Depending on personal 

preference and bread types, a 

different browning setting may be 

required. For light-textured breads 

such as raisin toast and white 

breads this may require a lighter 

setting, whilst heavier textured 

breads such as rye bread may 

require a darker setting.

WARNING:

 The toaster is 

electronically controlled 

and will not lock down in 

the toasting positon until 

the toaster is plugged 

into a 230V or 240V 

power outlet, switched 

on and the control lever 

is latched down in the 

locked position.

Cancel Button

The CANCEL button can be selected 

during operation to cancel the 

toasting process. The CANCEL button 

illuminates when the carriage control 

lever is locked down into position and 

the toasting process is in operation.
Pressing the CANCEL button any 

time during operation will cause the 

carriage lever to raise the toast and 

cancel the toasting process.

Defrost Button

The DEFROST button is used to  

toast frozen bread. Place the  

frozen bread into the bread slots, 

select the desired browning setting 

and press the carriage control lever  

down and lock into position, then 

press the DEFROST button. The 

DEFROST button illuminates during  

the toasting process.