9
Operating Your Kambrook
Bench Mixer
1.
Ensure the Speed Control Dial is
set to the ‘OFF’ position.
2.
Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button to lift the Mixer Head up
until it stops. Release the ‘Tilt’
button. The Mixer Head is now in
the elevated position.
3.
Attach and securely lock the
mixing bowl in place.
4.
Attach and securely lock the
splash guard in place.
5.
Insert the leaf beater, dough hook
or whisk attachment depending
on which attachment the
recipe requires.
6.
Add ingredients into the mixing
bowl supplied as listed in
the recipe.
7.
Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button. Push the Mixer Head
down so that it is in the horizontal
position and the leaf beater,
dough hook or whisk attachment
is inside the mixing bowl. Release
the ‘Tilt’ button.
8.
Insert the power cord into a 230
or 240V power outlet and switch
the power outlet on. The Speed
Control Dial will illuminate and
“flash” red.
WARNINg:
Never exceed
speed setting number 1
when kneading heavy
ingredients such as dough.
9.
To commence mixing, turn the
Speed Control Dial in a clockwise
direction. The Speed Control Dial
will illuminate red. Always begin
mixing at a lower speed setting
to prevent splattering. Increase
the speed suited to the mixing
task. The speed setting can be
adjusted during operation by
turning the Speed Control Dial.
Use the Mixing Guide on page
12 as a reference.
10.
Use the Pulse Function when you
require a quick burst of power or
for quick incorporations, such as
adding chocolate chips to cookie
mixes, fruit and nuts to bread
dough, or flour to cake batter.
Turn the Speed Control Dial in
an anti-clockwise direction
and hold it in this position. Hold
the dial for no more than 30
seconds at one time to avoid
overheating. When the dial is
released, it returns automatically
to the ‘OFF’ position.
11.
Occasionally stop the mixer
during the operation and scrape
any food mixture down the sides
of the mixing bowl with a spatula.
NOTE:
Always turn the Speed
Control Dial to the ‘OFF’ position
if you need to scrape down the
mixing bowl during use.
12.
When mixing is complete, turn the
Speed Control Dial to the ‘OFF’
position, switch the appliance off
at the power outlet and remove
the power cord from the outlet.
Summary of Contents for PowerMix Planetary KSM500
Page 2: ...Instruction Booklet PowerMix Planetary Bench Mixer Suits all KSM500 models...
Page 23: ...22 Notes...
Page 24: ...23 Notes...
