14
Storing Your Steam Station
• Set the Variable Steam Control
to the MIN position and turn the
Temperature Control on the iron
to MIN.
• Switch the power off at the power
outlet and disconnect the power
cord from the power outlet.
• Rest the iron on the soleplate on
the Iron Rest of the steam station
and allow to cool completely
before storing.
• Empty the tank and replace in
the steam station once empty
for storing.
• Store the steam station in a safe
place where it can not fall or
be damaged.
• Do not set anything on top of
your steam station.
• It is not recommended to leave
your steam station resting on
your ironing board when not in
use as the ironing board can
be knocked causing the steam
station to fall and be damaged.
Cleaning the Soleplate and
Exterior
• Ensure that the steam station
is disconnected from the
power outlet.
• To remove residue which may
have built up from certain
fabric finishes, clean the non-
stick soleplate with a rough
cloth that has been soaked in a
vinegar and water solution. Dry
thoroughly with a soft cloth.
NOTE:
You may also use a
commercial sole plate cleaner
found at most supermarkets to
remove residue.
• To clean the steam holes, simply
use a damp cloth to wipe away
build up of lint or starch from
inside the steam holes.
• Wipe the outer housing with a
soft, damp clean cloth and polish
with a dry cloth.
NOTE:
Never use abrasives or
scouring pads to clean the
soleplate. Avoid hard contact
with metal objects. Do not scratch
or damage the surface of the
soleplate. Do not use harsh or
abrasive cleaners as they may
damage the surface of the iron.
Never immerse the iron in water
or any other liquid.
