Kamco Descaling Pump Manual
C20 | C40 | C90 | C210
______________________________________________________________________________
Kamco Descaling Pump Manual
April 2022 edition
19 |
P a g e
SECTION D
–
USE OF THE DESCALING EQUIPMENT
Safety Precautions
When working with acidic descaling chemicals always wear suitable protective clothing and goggles.
Check and observe instructions supplied with descaling chemicals.
Always add the acid to the water, NEVER add water to the acid.
Scalebreaker controls
Scalebreaker pumps are supplied with the following
controls:
Flow reverser (all models) :
This lever directs the flow either clockwise or anti-
clockwise around the system. The direction the lever is
pointing is the direction of flow.
Water Inlet tap (models with fresh water flush facility):
Allows the introduction of fresh water directly into the
Scalebreaker tank.
Circulation / dump valves
(models with flush facility):
The handle on these valves directs the water either to
recirculate or to dump.
When the valve handle is in the horizontal position the
valve is closed.
Hose connections to the Scalebreaker pump
Flow and Return Hoses:
need to be connected to the equipment being descaled so that a circuit is created allowing
water to travel back to the Scalebreaker pump.
Water Inlet Hose:
needs to be connected to a suitable water supply.
Dump Hose:
needs to be directed into a suitable foul sewer (if waste is neutral) or waste disposal container.
