Assembly
EN
12
Step 3
11
14
8
7
24
25
30
15
5
10
6
Step 4
Please fix the component
16
on the left side
of the barrel grill with the screws
27
M6 x 12
(6 x needed). Insert the appropriate screws
from the inside and outside of the barrel
through the holes provided.
Bitte setzen Sie
Bauteil
32
zwischen die Unterlegscheibe und
die Mutter. Schrauben Sie dann erst die Teile
zusammen.
Component
13
is attached to
component
16
as shown in the illustration.
Use screw
27
M6x12 for fastening as well.
ASSEMBLY STAGES
Take components
6
and
10
and insert
them into each other as shown in the illus-
tration. These are the legs of the grill. Then
slot in component
5
at the bottom using the
holes provided for this purpose.
Now screw component
15
to components
6
and
10
from below with screws
25
M6
x 40 (4x required) as shown in the illustration.
Step 1
Step 2
Next, screw component
11
(2x required) to
component
10
from the outside on the right
and left. Use the screws
25
M6 x 40 (6x
required). Please make sure that the com-
ponent
14
(2x required) is fixed on the right
and left from the inside with the screws
24
M6 x 45 (2x required) in the lower holes on
the front, as shown in the picture. On both
sides, component
14
is now at an angle to
component
10
.
The wheels, component
7
(2x required),
are now attached to the bottom of the right
legs using component
8
and secured with
screws
30
M10 (2x required).
16
13
27
27
32
132736_Kamino_BBQ_Anleitung_A4_DE_EN_FR_IT_ES_35S.indd 12
05.12.19 12:26
