background image

 2 

 

WELCOME 

Thank  you  for  purchasing  your  Kampa  awning.    Please  read  these  instructions  care-
fully  before  attempting  to  set  up  your  awning  and  retain for future  reference.   If  used 
properly, your awning should give you years of trouble free use.  We recommend that 
your awning is insured against accidental and storm damage as this is not covered by 
the warranty.   
 
Awnings  contain  a  high  proportion  of  synthetic materials  and  under  certain  conditions 
will be affected by condensation inside the awning.  This should not be confused with 
leaking and condensation can be improved by ensuring adequate ventilation.   
 

IMPORTANT: 

The main seams of this awning have been factory taped to help prevent 

leakage.  Depending upon your expectations, it may be necessary to treat the remain-
ing seams with a seam sealant.  Seam sealant should also be applied to areas where 
the taping is damaged or has peeled away through wear and tear.  It can also be ap-
plied  to  areas  where  a  leak may  have  developed.   Seam  sealant is  available through 
your dealer.  We recommend McNett Seamsure.   
 
This awning is designed for use in light to moderate weather.  During strong winds or 
snowfall we recommend that you take your awning down.  The awning is designed for 
touring use; it is not designed for static or commercial use.

 

 
We  recommend  a trial  run  before  using your  awning for  the first  time.   This  will  allow 
you  to  familiarise  yourself  with  the  awning,  its  set  up  and  any  limitations  the  awning 
may have for your particular use.   
 
Before using for the first time please check the contents of your awning 
 

Awning flysheet 

Shock corded flexible pole set 

Spring linked steel legs 

Adjustable steel stretcher pole 

Inner tent 

Steel pole and clamp set 

Adjustable upright poles (with spike on the top) 

Peg bag 

Carry bag 

If you are missing any parts please contact your supplying dealer. 

 7 

 

SEAMS 
The main seams of this awning have been factory taped to help prevent leakage.  De-
pending  upon  your  expectations,  it  may  be  necessary  to  treat  the  remaining  seams 
with a seam sealant.  Seam sealant should also be applied to areas where the taping 
is damaged or has peeled away through wear and tear.  It can also be applied to areas 
where  a  leak  may  have  developed.    Seam  sealant  is  available  through  your  dealer.  
We recommend McNett Seamsure. 
 
SUITABILITY 
This awning is designed for use in light to moderate weather.  During strong winds or 
snowfall we recommend that you take your awning down.  The awning is designed for 
occasional use; it is not designed for static or commercial use. 
 
UV DEGRADATION 
Awning  fabrics  can  be  weakened  by  prolonged  exposure  to  sunlight.    Under  normal 
holiday  use  your  awning  will  give long  service  but  use for  extended  periods  in  strong 
sunlight will soon cause deterioration.  In those cases it would be wise to use a site as 
shaded as possible.  UV degradation is not covered under the warranty.  The warranty 
does  not  cover  awnings  used  on  permanent  sites,  displays  or  for  commercial  pur-
poses. 
 
CONDENSATION 
Awnings  contain  a  high  proportion  of  synthetic materials  and  under  certain  conditions 
will be affected by condensation inside the awning.  This should not be confused with 
leaking and condensation can be improved by ensuring adequate ventilation.  Conden-
sation and its effects are not covered under the warranty. 
 
SAFETY 
DO  NOT  COOK  IN THE  AWNING OR  USE  NAKED FLAMES.   READ  AND  UNDER-
STAND THE FIRE PRECAUTIONS LABEL SEWN INTO THE INSIDE OF THE AWN-
ING. 
 
DISMANTLING 
Reverse  the  set  up  procedure.    Ensure  that  all  parts  are  clean  before  packing  in  the 
carry bag.  If the awning is wet or damp, dry fully as soon as possible. 
 
CARE 
Awnings are best stored opened out.  Air fully and ensure it is totally dry before pack-
ing away.  Store in a well ventilated dry place.  A wet/damp awning will develop mildew 
surprisingly quickly. 
Dirty  awnings  can  be  washed  using  clean  water  and  a  soft  brush.    Do  not  scrub  and 
never use detergents. 
Poles  should  be  protected  from  damage  and  should  be  stored  completely  dry to  pre-
vent  corrosion  of the ferrules.    To  prevent  corrosion  steel  poles  can  be  stored  with  a 
light coating of petroleum jelly to protect them.  Ensure that this is completely removed 
before use. Damage due to improper use, wind damage or neglect is not covered un-
der the warranty.  Have any damage repaired at the first opportunity.   

Summary of Contents for Camper Pod Maxi

Page 1: ...heet should be made by a company recommended by Kampa or your supplying dealer Repairs and alterations made by an unauthorised company may invalidate your warranty UPRIGHT POLES Two upright poles are supplied with this awning They can be used to hold up the rear tunnel or as canopy poles to hold the front door open as a canopy Use guy lines to support the poles Kampa UK Limited Witham CM8 3EU mcl ...

Page 2: ...nt should also be applied to areas where the taping is damaged or has peeled away through wear and tear It can also be applied to areas where a leak may have developed Seam sealant is available through your dealer We recommend McNett Seamsure SUITABILITY This awning is designed for use in light to moderate weather During strong winds or snowfall we recommend that you take your awning down The awni...

Page 3: ...l the tunnel to the vehicle by attaching guy lines ropes not supplied to the top corners of the tunnel throwing these over the vehicle and tying them to the wheels or pegging them down Take care that the guy lines ropes do not damage the vehicle The Camper Pod is a universal fit awning designed to fit camper vans up to 1 90 me tres high maximum vehicle or rail height The fit is universal and is no...

Page 4: ... Peg the intermediate pegging points pegging the points either side of doorways first These doorways should be cross pegged the points should be pulled across each other Once completed the awning should look taut without too many creases if necessary readjust the pegging 8 9 10 11 13 15 14 12 5 16 17 20 21 18 Take the steel stretcher poles into the awning Put one end in the pocket at the front cor...

Reviews: