EN
4445103378
7
•
Never place the product near or on flammable materials, even when
cooling down. Keep a distance of at least 100 cm to flammable
materials.
•
The product must stand on a base that can withstand heat of up to at
least 80 °C. The housing can become very hot when in use.
•
Observe the safety instructions, see chapter “Safety precautions when
handling liquid gas” on page 5.
Inserting the gas cartridge
!
1. Proceed as shown (fig.
2. Do not use excessive force. If the cartridge lock lever will not push
down, check the position of the notch (fig.
3. If you hear a hissing noise, the gas cartridge has not been fitted cor-
rectly. Release the cartridge lock lever and reposition the cartridge.
Igniting the product
!
1. Proceed as shown (fig.
2. If the burner does not ignite, repeat the ignition.
Removing the gas cartridge
!
The cartridge may be disconnected even if some gas remains.
1. Proceed as shown (fig.
2. Check the content of a cartridge by shaking and listening for the liq-
uid gas.
3. Refit the protective cap and store the gas cartridge in a cool, dry, well
ventilated place out of the reach of children.
4. Check the condition of the seal (fig.
4. A, page 3). Let the seal be
replaced by a qualified person if material is brittle or porous.
Moving and storing the product
!
Proceed as follows:
1. Turn off the product.
2. Let the product cool down completely.
3. Remove the gas cartridge from the product (see chapter “Removing
the gas cartridge” on page 7).
4. Clean the product (see chapter “Cleaning and maintenance” on
5. Store the device on a level, stable place out of the reach of children.
Cleaning and maintenance
!
Clean the product after each use:
1. Ensure the product is cold.
2. Remove the gas cartridge from the product.
3. Wash the surfaces of the product with hot soapy water (fig.
4. Periodically check the burner to see it is free of dirt like insects or food
remains. Use a brush to clean it.
Troubleshooting
Warranty
For repair and warranty processing, please include the following docu-
ments when you send in the device:
•
A copy of the receipt with purchase date
•
A reason for the claim or description of the fault
Disposal
➤
Place the packaging material in the appropriate recycling waste bins,
wherever possible.
Technical data
WARNING! Explosion hazard
Check that the seal (fig.
4. A, page 3) is in place and in
good condition.
WARNING! Health hazard
Do not leave the product unattended while in use.
WARNING! Health hazard
•
Do not transport or store the device with the gas car-
tridge inserted.
•
Remove the gas cartridge in a well-ventilated location,
away from any sources of ignition and away from other
people.
•
Ensure that there are no naked flames in the vicinity.
•
Only remove the gas cartridge when the product is
switched off and has cooled down.
WARNING! Health hazard
Do not transport or store the device with the gas cartridge
inserted.
WARNING! Health hazard
Check the proper functioning of the connection/disconnec-
tion system of the gas cartridge regularly.
Fault
Solution
No gas
Check whether the gas cartridge was inserted properly.
Gas cartridge is empty (Test by shaking the cartridge).
Outside temperature is below 4 °C, move to warmer
surroundings.
No ignition
Clean the burner head with a brush.
Consult a local recycling center or specialist dealer for details
about how to dispose of the product in accordance with the
applicable disposal regulations.
Evo Series 2
(portable gas stove)
Gas category:
Direct pressure, Butane
Gas cartridge type:
P220
Ignition: Piezo
Burner heat input:
2.2 kW (160 g/h)
Dimensions (H x W x D):
372 x 260 x 123 mm
Weight:
Weight with carry case:
1.75 kg
2.8 kg
Certification:
Summary of Contents for EVO 2 Series
