Ka
Control
for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Heating operating
mode setting
3.2.6 Operating Modes (Mode Key)
To call up the "Operating modes" selection menu, press the MODE
key (quick access) or use the navigator.
Calling up the "Operating modes" menu using the navigator:
The operating mode can be set using the navigator depending on
the parameter setting.
Automatic
mode:
The control switches automatically between
heating mode and cooling mode whilst
maintaining a neutral zone.
Heating mode: The control only works in heating mode.
Cooling mode: The control only works in cooling mode.
The preferred operating mode can be selected by turning the
navigator in the Operating Mode selection menu.
Pressing the navigator activates the selected operating mode.
The MODE key is locked with 2-pipe applications, as Heating and
Cooling operating modes are specified via an external contact or
a clip-on sensor. It is generally not possible to adjust the operating
mode using the KaController in 2-pipe applications.
If no action is carried out using the navigator or function keys for
3 seconds, the last change made is saved and the default view is
called up.
Venkon
18
