Ka
Control
for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Venkon
5
1. Correct and Proper Use
Kampmann KaControllers and Venkons are designed according to
the state of the art and recognised safety regulations. Nevertheless
their use can lead to dangers to personnel or damage to the unit or
other material items if they are not installed and operated correctly
or not used correctly and properly.
Applications
The KaController should only be used as a room unit to control
Kampmann systems.
KaControllers should only be used
-
Indoors (for instance in residential properties and offices,
showrooms etc.)
KaControllers should not be used
- Outdoors,
- In humid areas, such as swimming pools, and in wet rooms,
- In areas where there is a risk of explosion,
- In areas with a high dust content,
- In areas with an aggressive atmosphere.
Venkons should only be used indoors (for instance in residential
properties and offices, showrooms). They should not be used in
humid areas, such as swimming pools or outdoors. During
installation, the products should be protected against moisture. In
case of doubt, discuss the application directly with the
manufacturer. Any use other than the uses specified above is
deemed not to be correct and proper use. Any damage resulting
from this shall be the sole responsibility of the operator of the unit.
Correct and proper use is also deemed to include compliance with
the installation instructions described in this manual.
Specialist knowledge
The installation of this product requires specialist knowledge of
heating, cooling, ventilation and electrical engineering. This
knowledge is generally assumed to have been gained in the course
of vocational training in the aforementioned fields and is not
described separately.
Damage resulting from improper installation is the sole
responsibility of the operator of the units.The installer of these units
should have adequate knowledge, gained in specialist vocational
training about
- Safety and accident prevention regulations
- Guidelines and recognised technical regulations, i.e. Association of
German Electricians (VDE) regulations, DIN and EN standards.
Purpose and scope of application of the manual
This manual contains information on the operation of the
KaController. The information contained in the manual can be
changed without prior notification.
