Kampmann PowerKon QE, Assembly Instructions Manual

PowerKon QE

Assembly instructions

5

2.4

Personnel requirements - Qualifications

Expertise

The installation of this product requires specialist knowledge of heating, cooling, ventilation, in-
stallation and electrical engineering.

Damage caused by improper installation is the responsibility of the operator or installer. The in-
staller of these units should have adequate knowledge of the following gained from specialist
professional training

Safety and accident prevention regulations
Country-specific guidelines and recognised technical regulations, i.e. Association of German
Electricians (VDE) regulations, DIN and EN standards.

2.5

Personal Protective Equipment

Personal protective equipment is used to protect people from impaired safety and health when
working with the unit. The applicable accident prevention regulations at the place of use apply
in all cases.

3

Transport, storage and packaging

3.1

General transport instructions

Check on delivery for completeness and transport damage.

Proceed as follows in the event of visible damage:

Do not accept delivery or only accept with reservations.
Record any transport damage on the transportation documents or on the transport company's
delivery note.
Submit a complaint to the freight forwarder.

IMPORTANT NOTE!

Warranty claims can only be made within the applicable period for complaints.
(More information is available in the 

T&Cs

 on the Kampmann website)

IMPORTANT NOTE!

2 people are needed to transport the unit. Wear personal protective clothing
when transporting the unit. Only lift the unit on both sides and not by the pipes /
valves.

IMPORTANT NOTE!
Material damage caused by incorrect transport!

Units being transported can drop or topple over if transported wrongly. This can
cause serious material damage.

Proceed carefully when unloading the equipment on delivery and when
transporting it on site and note the symbols and instructions on the pack-
aging.
Only use the holding points provided.
Only remove packaging shortly before assembling the unit.

3.2

Scope of delivery

IMPORTANT NOTE!
Check the scope of delivery!

Check the delivery for damage.
Check that the articles and type numbers are correct.
Is the delivery and number of items delivered correct?

3.3

Storage

Store packaging under the following conditions:

Do not store outdoors.
Store in a dry and dust-free place.
Store in a frost-free place.
Do not expose to aggressive media.
Protect from direct sunlight.
Avoid mechanical vibrations and shocks.

IMPORTANT NOTE!

Under certain circumstances, packages can carry storage instructions that exceed
the requirements listed here. Comply with these instructions accordingly.

3.4

Packaging

Handling packaging materials

IMPORTANT NOTE!

Dispose of packaging materials in line with the applicable statutory requirements
and local regulations.