5
Ultra
1.54
Comfortable indoor climate in high-end interiors
Installation and operating instructions
1. Intended use
Kampmann Ultra units are constructed in line with the state of the art and
recognised safety regulations. Nevertheless, their use can result in danger
to people or damage to the units or other material property if they are not
appropriately installed and operated or correctly and properly used.
Applications
Ultra should only be used
• indoors (for instance in residential properties and offices, showrooms etc.)
Ultra should not be used
• outdoors,
• in humid areas, such as swimming pools, in wet rooms,
• in areas where there is a risk of explosion,
• in areas with a high dust content,
• in areas with an aggressive atmosphere.
Protect the products from any moisture during installation. Check the
application with the manufacturer in case of any doubt. Any use other
than the use specified above is deemed not to be correct and proper. The
operator of the unit is solely responsible for any damage arising as a result
of this. Correct and proper use is also deemed to include compliance with
the installation instructions described in this manual.
Specialist knowledge
The installation of this product requires specialist knowledge of heating,
cooling, ventilation and electrical engineering. This knowledge, generally
learned in vocational training in one of the fields mentioned above, is
not described separately. Damage caused by improper installation is the
responsibility of the operator.
The installer of these units should have adequate knowledge of the
following gained from specialist vocational training
• safety and accident prevention regulations
• guidelines and recognised technical regulations, i.e. Association of
German Electricians (VDE) regulations, DIN and EN standards.
Purpose and scope of these instructions
This manual contains information on the installation of the Ultra for
operation. The information contained in these instructions can be changed
without prior notification.