_________________________________________________________________________________________________________________________________
Operation Manual
Kamstrup USB Meter Reader
13
5
5
1
2
-7
3
8
G
B
/
1
0
.2
0
0
9
/
A
1
2.2 Reading
Introduction
The view "Reading” is used when you are out collecting data or installing a new meter using a portable PC
with a "USB Reader" inserted into the USB port. The view has two tabs: "Read meter(s) on USB Reader"
and "Read specific meter(s)". This chapter gives you a detailed explanation about what you can see and do
in the view "Reading".
Topics:
·
Switching to "Reading" view
·
Overview of the "Reading” view
·
Using the "Read meter(s) on USB Reader"
·
Using the "Read specific meter(s)" tab.
Switching to “Reading” view
You can either switch to the "Reading” view by clicking on “Reading” on the toolbar as shown below or
through the menu View
ð
Reading.
