Operating Manual (Rev. 1)
SKORPION® Lever WS-016 type
12. Operation
After cleaning the cover
hole, the appropriate type
of hook is inserted into the
cover and the locking
setting of hook is checked.
Insert the hook into the
lever structure (through
the gap between arms)
and position the support
feet (the foot under the
eccentric mechanism on
the hatch envelope and
the feet at the ends of
arms on the unclogged
cover). Then tighten the
hook retaining nut until
you feel resistance.
After gripping the rubber
cap of the lever arm, turn it
into position as shown. The
eccentric mechanism in
combination with the lever
principle causes minimal
lifting of the cover edge on
the support foot side of the
envelope.
The lever and hook are then removed. The unclogged cover is now ready to be opened with the
selected lifting device.
Page 10 of 13
