Aetos Installation Manual
19.2
Configuration
19.2
Configuration
Selection of the
Joyu
icon allows simple configuration of Joyu commands for
all connected CAN bus devices. Aetos detects which devices are present on
the bus and includes actions for these devices, too.
Figure 73 shows an example of Joyu without any functions assigned. Illus-
tration on the right enumerates the buttons. Wheel can be pressed, so it also
functions as a button.
Figure 73:
Initial, empty Joyu configuration window.
1. Press a button or turn the wheel on Joyu. A window appears and asks
which device/action pair shall be assigned to this button.
2. Assign a device from the list and its action to the button pressed in the
previous step. Figure 74 shows an example for button 1.
Figure 74:
Joyu button 1 was assigned to Nesis with serial number 100 with
the autopilot menu action.
3. The process is repeated for all buttons. Some of the buttons can remain
unused.
4. Rotate a wheel. Same window appears, but with less options. Figure
75 illustrates an example.
81
©
Kanardia
2019–2020