Emsis — Manual
7.2
Hardware Tank
Figure 31:
Software (simulated) fuel tank level adjustment
7.2
Hardware Tank
Hardware
tank is based on fuel level sensors. First you need to con-
nect sensors to Daqu and activate/configure appropriate channels.
Once this is completed, you can continue with tank calibration.
When selecting the Tank option a window illustrated in Figure 32
opens.
T2
options are shown only when the second fuel level channel
is also active.
Figure 32:
Tank options.
There are two ways to calibrate the tank:
Tank calibration in steps. This involves pouring known quan-
tity of fuel and taking sensor readings in several steps.
Min/max calibration. This involves selecting some known tank
shape and then defining sensor values at empty (min) and full
(max) sensor position.
60
©
Kanardia
2021