Horis User Manual
4. Operations
1. UTC time and GPS reception symbol. Horis gets time from
GPS and the time will be shown only when GPS signal is avail-
able.
2. Local, sunrise and sunset times. They all depend on GPS signal
as well and they are visible only when GPS signal is available.
Local time requires correct time zone - see section 4.6.10 for
more details.
3. Stopwatch can be used by turning the knob. Symbols on the
left an right side of the stopwatch time define available actions.
•
Turn right to start the stopwatch.
•
Turn either left or right to stop for lap.
•
Turn left to reset or right to continue.
You can switch the pages even when the stopwatch is running.
In this case, a stopwatch symbol appears on the top right part
of each screen.
4. Flight time starts counting automatically when takeoff condi-
tions is detected and stops when landing is detected. The time
restarts with zero on next takeoff.
Note, false landings may be detected when Horis is used in a
rotorcraft. A slow speed or hovering will falsely trigger landing
event and flight time will reset when movement is resumed.
4
Operations
Horis is operated using a single push knob. You can do the following
actions with the knob:
•
Rotate the knob to change something.
42
©
Kanardia
2021
Summary of Contents for Horis
Page 2: ......
