Horis User Manual
1. Introduction
1
Introduction
First of all we would like to thank you for purchasing our Horis device.
Horis AD-AHRS is an electronic device, which includes several state
of the art sensors and combines them into a small PFD display. It
fits into a standard 57 mm (2
1
4
”) / 80 mm (3
1
8
”) panel hole. It can
serve as a standalone PFD display and it may be used as primary
instrument or as a perfect backup.
This manual describes the technical description of the unit, installa-
tion and operation.
CAUTION: Horis is not TSO approved as a flight instrument.
1.1
Latest Manual Version
The Horis manual changes with time. Your printed manual may be
out of date. Please check our web site
for the latest manual version.
1.2
General Description
Horis is an electronic device. It consists of a set of sensors and an LCD
display. Majority of sensors are built into its compact housing: static
pressure, dynamic pressure, 3 axis accelerometer, 3 axis angular rate
and GPS receiver. Only GPS antenna and OAT sensor are externally
mounted. All sensors are solid state - there are no moving parts,
which means less problems with fatigue and aging.
Horis has two processors: sensor processor and display processor.
The sensor processor reads sensors and calculates airdata, attitude,
9
©
Kanardia
2021
Summary of Contents for Horis
Page 2: ......
