background image

Combo — Manual

7.1

Warranty

7.1

Warranty

Kanardia d.o.o. warrants the Product manufactured by it against
defects in material and workmanship for a period of twenty-four (24)
months from retail purchase.

Warranty Coverage

Kanardia’s warranty obligations are limited to the terms set forth
below:

Kanardia d.o.o. warrants the Kanardia-branded hardware product
will conform to the published specification when under normal use
for a period of twenty-four months (24) from the date of retail pur-
chase by the original end-user purchaser (”Warranty Period”). If a
hardware defect arises and a valid claim is received within the War-
ranty Period, at its option and as the sole and exclusive remedy
available to Purchaser, Kanardia will either (1) repair the hardware
defect at no charge, using new or refurbished replacement parts, or
(2) exchange the product with a product that is new or which has
been manufactured from new or serviceable used parts and is at least
functionally equivalent to the original product, or, at its option, if (1)
or (2) is not possible (as determined by Kanarida in its sole discre-
tion), (3) refund the purchase price of the product. When a refund is
given, the product for which the refund is provided must be returned
to Kanardia and becomes Kanardia’s property.

Exclusions and Limitations

This Limited Warranty applies only to hardware products manufac-
tured by or for Kanardia that have the ”Kanardia” trademark, trade
name, or logo affixed to them at the time of manufacture by Ka-
nardia. The Limited Warranty does not apply to any non-Kanardia

20

©

Kanardia

2015-2018

Summary of Contents for INDU COMBO


























Reviews: