background image

Combo — Manual

7.1

Warranty

hardware products or any software, even if packaged or sold with Ka-
nardia hardware. Manufacturers, suppliers, or publishers, other than
Kanardia, may provide their own warranties to the Purchaser, but
Kanarida and its distributors provide their products

AS IS

, without

warranty of any kind.

Software distributed by Kanardia (with or without the Kanardia’s
brand name including, but not limited to system software) is not cov-
ered under this Limited Warranty. Refer to the licensing agreement
accompanying such software for details of your rights with respect to
its use.

This warranty does not apply: (a) to damage caused by use with non-
Kanardia products; (b) to damage caused by accident, abuse, misuse,
flood, fire, earthquake or other external causes; (c) to damage caused
by operating the product outside the permitted or intended uses de-
scribed by Kanardia; (d) to damage caused by service (including
upgrades and expansions) performed by anyone who is not a repre-
sentative of Kanardia or an Kanarida Authorized Reseller; (e) to a
product or part that has been modified to significantly alter function-
ality or capability without the written permission of Kanardia; (f)
to consumable parts, such as batteries, unless damage has occurred
due to a defect in materials or workmanship; or (g) if any Kanardia
serial number has been removed, altered or defaced.

To the extent permitted by applicable law, this warranty and reme-
dies set forth above are exclusive and in lieu of all other warranties,
remedies and conditions, whether oral or written, statutory, express
or implied, including, without limitation, warranties of merchantabil-
ity, fitness for a particular purpose, non-infringement, and any war-
ranties against hidden or latent defects. If Kanardia cannot lawfully
disclaim statutory or implied warranties then to the extent permitted
by law, all such warranties shall be limited in duration to the dura-
tion of this express warranty and to repair or replacement service as
determined by Kanardia in its sole discretion. Kanardia does not

21

©

Kanardia

2015-2018

Summary of Contents for INDU COMBO


























Reviews: