Nesis III — Installation Manual
13.3
Channels
Engine
ECU
FF-Model
Generic engine (any engine)
Rotax 582 65 HP
Rotax 912 80 HP
Rotax 912 100 HP
Rotax 914
Rotax 912 iS
Rotax 915 iS
Jabiru 2200
Jabiru 3300
Geiger Wankel A 2-74
MW fly with CC-m
UL Power RS-232
UL Power CAN 125 kb/s
UL Power CAN 500 kb/s
Table 7:
Engine models, ECU connectivity and fuel flow availability (
from
ECU,
from software model).
Alarm light
turns on the switch, when an alarm condition is met. (SW 3.4
does not support this yet.)
When the
ECU start
is active, an additional option appears. It is labeled as
iS start switch RPM threshold
. This defines the RPM limits that must be
reached to automatically disengage the start button switch.
13.3
Channels
Nesis lists all channels available on Daqu. Each channel can be configure and
set according to the channel type, sensor type and channel function.
Channels types are designated with letters, which define the harware capa-
bilities of each channel. Channels labelled with Z and Y are digital channels,
while channels labeled with A, B, C, D, E and F are analogue channels. Please
refer to the Daqu manual for more details.
Selecting a channel opens a small action window, Figure 58. Some of the
actions shown in the window depend on the channel function or sensor type.
Edit
Opens the channel editor window, which allows tuning the channel
details: function, sensor type, filter, etc.
64
©
Kanardia
2018
