User's manual
K&F NOMOS XLC
KLING & FREITAG GMBH © 2014
Version 4.1
Page 16 of 21
10. Transport and Storage
The housing of the speaker is protected against short-term moisture by a coating. The
accessories has to be stored, transported and used in a dry enviroment. The NOMOS XLC
System is not designed for long-term use in a corrosive environment.
Make sure that the system is adequately ventilated during longer storage periods so that
possible residual moisture can escape from the equipment.
Furthermore, you should ensure that the NOMOS XLC System is protected from mechanical
strain to prevent possible damage.
We recommend using the optional soft cover.
11. Technical Specifications
Design
Bass reflex system(Operations via K&F
SystemRack)
Crossover frequencies (2-Way-Mode / 60
Hz)
100Hz / 60 Hz
Lower cut-off frequency (-3 dB / -10 dB)
33 Hz / 28 Hz
Coverage
Cardioid / Hypercardiod
Power handling (front / rear)
2000 W / 1000 W nominal
1)
4000 W / 2000 W program
2)
Max. SPL
140 dB (SPL Peak / 1 m / free field)
Components
3 x 18“ long excursion chassis, 100mm
voice
coil with double centring, internal and
external ven-
tilation, demodulation ring for minimal
distortion
Impedance (nominal) front / rear
4 Ohm / 8 Ohm
Connection
2 x Speakon 4-pin NLT4MP
front speakers: 1+ / 1- ,
rear speaker: 2+ / 2-
IN parallel into OUT
Enclosure Design
15 mm frame reinforced multiplex
plywood enclosure
with highly resilient Polyurea synthetic
black,
coating,
8 ergonomic butterfly handles,
Summary of Contents for NOMOS XLC
Page 2: ......
