User's manual
K&F NOMOS XLC
KLING & FREITAG GMBH © 2014
Version 4.1
Page 8 of 21
5.
Stacking the Subwoofers
1.
Securely place the bottom subwoofer onto a level surface.
2.
Stack the subwoofers on top of one
another.
Make sure that the stacking feet of
subwoofers stacked on top of one
another are securely positioned in the
grooves of the lower speaker.
You must additionally secure vertically
standing stacked NOMOS XLC systems
from falling since the structural safety
is not guaranteed, otherwise.
6.
NOMOS XLC combined with other K&F tops.
The NOMOS XLC can be combined with K&F top speakers using the controller K&F CD 44.
•
To do so, select the desired LS blocks for the top in the Controller CD 44 or systemamp
TOPAS, and combine these with the desired LS block for the NOMOS XLC.
In the respective Hardware Manuals, you will find detailed descriptions about connecting the
SEQUENZA 10 speakers and the settings necessary on the System Controller CD 44. SEQUENZA
10 N/W
7.
Cardioid Arrays with CD 44
The subwoofer NOMOS XLC is a cardioid loudspeaker.
A cardioid array results in an increase of sound pressure towards the front because of the
rear-facing subwoofer. In the rear area (cardioid) or in the lateral side area (hypercardioid),
on the other hand, the sound pressure is clearly reduced.
With this, you achieve
•
less unwanted sound on the stage
•
low feedback
Summary of Contents for NOMOS XLC
Page 2: ......
