background image

Operating Instructions

K&F SONA 8

KLING & FREITAG GMBH © 2016

Version 1.4

Page 4 of 21

1.

Introduction

Thank you for purchasing a KLING & FREITAG product. To guarantee a trouble-free operating
of the equipment and to allow your KLING & FREITAG SONA 8 system to achieve its full
potential read the operating instructions carefully before use. This item is a quality accessory
for the SONA 8 speaker system. As the owner of a SONA 8 loudspeaker, you now have a
versatile and highly professional tool which, when operated properly, is a true pleasure to
use.

1.1

Icons Used

Warning

This icon indicates a risk of injury or death. Not following these instructions may result in
serious health problems including potentially fatal injuries.

Caution

This icon indicates a possibly dangerous situation. Not following these instructions may cause
minor injuries or damage.

This icon marks instructions for proper use of the described products. Not following these
instructions may cause malfunctions or damage.

Tip

This icon marks information provided for simplified use of the described products.

1.2

About these operating instructions

© KLING & FREITAG GMBH. All rights reserved.

All specifications regarding the features of the described products and applicable safety
guidelines provided in these operating instructions are based on information available at the
time of publishing.

We assume no responsibility for technical specifications, dimensions, weights, and properties.

All information in these operating instructions is subject to change without notice.

All persons who use the speaker system must have this guide and all further information for
safe operations available to them during assembly, disassembly, and use. The speaker system
may neither be set up nor used until these operating instructions has been read, understood
and kept readily available in site.

The original language of all KLING & FREITAG operating instructions is German.

If you need operating instructions from KLING & FREITAG, you can order a replacement or
download it from our www.kling-freitag.de.

Contact:

info@kling-freitag.de
KLING & FREITAG GMBH, Junkersstr. 14, D-30179 Hannover
T49 (0) 511 96 99 70, T49 (0) 511 67 37 94

Summary of Contents for SONA 8






















Reviews: