Specifications RLAG
Single loop dimensions:
About 500 mm x 500 mm
Amplifier dimensions (W x H x D):
140 mm x 60 mm x 120 mm (without connectors)
Frequency range:
50 kHz … 30 MHz
Average noise level (without loops):
<= -145 dBm/Hz (at 10 MHz)
IP3:
>= +32 dBm (2x -6 dBm measuring tone at 10 MHz)
IP2:
>= +80 dBm (10.0 MHz + 10.2 MHz -6 dBm measuring tone, 0.2
MHz
measured difference tone)
Maximum output voltage:
>= 1 V
eff
, 1 dB compression
Supply via HF cable:
+6.0 V … +13.8 V,
m14.4 V!
Power supply:
max. 80 mA
HF output:
BNC 50 ohm
Weight:
<= 1.5 kg
Environmental conditions:
-20 ... +40 °C ambient temperature, <=100 % rel. humidity
IP65 (with connected loops and connection cable)
Compliance:
CE according to DIN EN 55013, EN 55020, EN 60065
RoHS / WEEE Directive, ear-Reg. 27676700
Specifications RLAGS (only deviating from 4G)
Single loop dimensions:
Diameter horizontal approx. 770 mm
Height incl. housing approx. 690 mm
Frequency range:
20 kHz … 30 MHz
Weight:
<= 2.0 kg
Changes are reserved in the course of technical development!
VERSION
DATE
NAME
K & M Burkhard Reuter
Page
2
of
8
1.4
24.11.2021
B. Reuter
RLA4G/GS
