Mounting
1.) Unpack and check product for damage and completeness.
1
Accessories bag:
4x clamping bolt M6 x 17 mm
6x protective cap
8x hex nut
8x washer
4x hex bolt M5 x 25 mm
2x connecting plate
1x wrench SW8/SW13
1x wrench SW10/SW13
2
2x base plate
3
2x attachment strip
4
2x base tube
2.) Assemble the stand and speaker cable
1
Push the cord through the base tube
and base from the top.
2
Push the connecting plate into the
opening. The plate must sit flush with
the base tube when in place.
NOTE: The connecting plate and the
base tube have different crosspiece
lengths to ensure that the parts are
assembled in the correct position. Pay
attention to the crosspiece lengths. The
components are easy to connect when
positioned correctly.
3
Insert the base tube into the base and
screw the two hex nuts into place. The
tightening torque must not exceed 5 Nm maximum.
3.) Attach the speaker to the stand
NOTE: Depending on the speaker used,
it may be necessary to attach the attach-
ment strip in dif-ferent positions.
1
for speaker
CUB 2 FR 15
2
for speaker
CS 35 FCR Mk3
