•
•
Press UP/DOWN
，
display “LED”
•
Press ENTER to change the content, the display will glinting at this moment
•
Press UP/DOWN to select “OFF”
•
Press ENTER to confirm, the select the working mode that you need. When stop
pressing, the display will shut after a while. When the display is closed, press any
button to activate the display. If setting the led to “off”, when stop pressing, the
display will shut after a while.
•
2
、
、
、
、
Details of program built inside
（
（
（
（
Pr- -
）
）
）
）
•
Press MENU, go back to the initial setting
•
Press UP / DOWN until Pr--
•
Press ENTER to choose, the display will glinting at this moment
•
Press UP / DOWN to change the address code to select pr00
•
Press ENTER to select and store the current menu options. DMX mode will be
•
stored automatically and the screen will stop glinting.
•
Remark: Pr14--- Pr30 Can change the content Of SP
，
correct the speed of jumping
change , SP00 is the fastest
，
SP15 is the slowest
•
Pr00-Pr13
：
R,G,B.W single color or multi-colors lighting
•
Pr14-Pr28
：
correspond with the Pr00-Pr13 add the strobe function.
•
Pr29
：
4 colors jumping.
•
Pr30
：
there are kinds of colors jumping
Page 10 of 17
