34
18. MAINTENANCE
Maintenance work listed in section “Maintenance” should be performed on a
regular basis. If you cannot perform maintenance work on your own, please
contact the authorized service center to request the required maintenance work.
!
!
PLEASE NOTE!
The manufacturer shall not be liable for any damage caused by failure
to perform maintenance work.
SUCH DAMAGE ALSO INCLUDES:
- Damage resulting from the use of non-original spare parts;
- Corrosive damage and other effects of improper storage of equipment;
- Damage caused by maintenance work performed by unskilled technicians.
You can find the list of addresses in your warranty card.
OBSERVE THE INSTRUCTIONS IN THIS MANUAL!
The generator must be maintained, operated and stored in accordance with the
instructions in this manual. The manufacturer shall not be liable for damage and
loss caused by failure to comply with safety and maintenance regulations.
THIS PRIMARILY APPLIES TO THE:
- Use of lubricants, fuels and motor oils not authorized by the manufacturer;
- Tampering with the product design;
- Misuse of equipment;
- Indirect losses caused by operation of the product with defective parts.
Motor oil significantly affects the engine performance and is the main factor that
determines its service life. Use oil intended for four-stroke engines, as it contains
detergent additives that meet or exceed the
SG
standards according to the APE
classification (or equivalent).
Generally, it is recommended to use oil with a viscosity of SAE10W-30,
SAE10W-40. Motor oils with a different grade shown in the table can be used
only if the average air temperature in your area does not fall outside the specified
temperature range. SAE oil viscosity or oil service category are indicated on the
APE tank label.
Fig. 24
-20 -10 0
10 20 30 40
0
C
10W-30, 10W-40
19. RECOMMENDED OILS
Summary of Contents for KS 1200i
Page 44: ......
