38
Spark plug
0.60 - 0.80 mm
Electrodes
Fig. 29
2. Loosen the bolts and remove the cover, screen
and flame arrester of the damper.
3. Descale the screen and flame arrester of
the damper with a wire brush.
4. Inspect the screen and flame arrester of
the damper. Replace them if they are
damaged.
5. Replace the flame arrester.
6. Replace the screen and cover of the damper.
7. Replace the cover and tighten the screws.
Match the protrusion of the flame arrester to the hole in the pipe damper.
!
!
PLEASE NOTE!
The engine and damper will get very hot after the generator has been started.
Do not touch the engine or damper with any part of your body or clothing during
inspection or repair until they have cooled down.
1. Remove the screws and then pull the protective cover towards you.
23. DAMPER AND FLAME ARRESTER
MAINTENANCE
Fig. 30
Fig. 31
Summary of Contents for KS 1200i
Page 44: ......
