GENERAL OPERATION
The nominal pressure range of the meter is indicated on the label fixed to the back
of the meter.
When the meter is first switched on using
, the top line of the display scrolls
through the model version number, battery status, pressure units, date and time.
The bottom line of the display shows a countdown number that starts at 10 and
reduces to zero. At zero the meter displays two lines of data.
All data can be printed via an optional infrared printer. The printed data can be
'live' data, 'frozen' data or 'stored' data. 255 sets of tests can be stored in the non-
volatile memory.
Two lines of 20 characters can be added to the header of printouts.
The meter is controlled using 8 buttons.
The eight buttons are:
ON/OFF
Press for ON or OFF.
The meter counts down from 10 after OFF is pressed.
Press
during this period to cancel OFF.
MENU
Press for MENU.
ZERO
Press and hold until there is a beep to ZERO the pressure reading.
BACKLIGHT
Press and hold until there is a beep to switch on the BACKLIGHT. Press and hold
to cancel.
HOLD/ PRINT
Press quickly to HOLD the reading - the display flashes. Press quickly to cancel
HOLD.
Press for 2+ seconds to PRINT. Press again to cancel PRINT.
Summary of Contents for KANE3500 Series
Page 1: ...KANE3500 PRESSURE METER Stock No 18965 2 June 2014 Kane International Ltd ...
Page 20: ......
Page 23: ......