One/Off power switch
On/Off slider switch which locate back side of Keyboard, when the slider switch have turn on, the power will be
lighted on. When you turn off the slider switch, the power will be lighted off.
ID button switch (locate at keyboard back side)
Before you wanted pairing to connect with devices, please choose BT1, BT2, BT3, BT4 anyone mode you wanted
connect, then press the ID button, keyboard function will become in pairing process.
How to Operating:
Before you starting use this keyboard, please detail READ below operating information;
Notice:
Please use the new AAA alkaline battery keep full power before you first time use BT-7301
Connect to Bluetooth host devices;
1.Take out BT-7301 unit from package box
2.Open PE bag of keyboard
3.Slider On/Off button to
“on” status at keyboard backside, it is mean power on status for waiting pairing with
iDevice(e.g. Apple device, Android Device or Notebook, PC with Window OS embedded Bluetooth dongle inside)
4.Open your iDevice Bluetooth searching mode.
5.Presse Bluetooth modes key(any mode key of BT1, BT2, BT3, BT4), then press the keyboard pairing button
key(locate on keyboard back side). You will find
“Kanex BT keyboard” string onto your iDevice screen shown.
Select the the
icon then press “Enter” key, your iDevice will automatically connect with Kanex BT keyboard well.
6.When you will not use keyboard for long time, suggest you shoud turn off power switch for saving battery power. If
you want to use it again, you just turn on power on switch then Kanex BT keyboard will still connect with iDevce
again, it is no need to pairing again.
If you want to connect another iDevice in BT-7301, you can choose another BT mode key then press the key then
follow above the process for connect device again.
Troubleshooting
Q1 : You can’t pairing Kanex BT Keyboard
1.As power saving design concern
, if you didn’t touch ID button key over pass 30 minutes during pairing process,
please re-open power switch again then you just follow press ID button for pairing again.
2.if the keyboard have any power transfer issue, you can try to turn off power switch then turn on it again, then you
can re-pairing keyboard again between iDevice and Kanex BT Keyboard.
3.Please make sure does battery power is fully enough for working, may you can check LED2 if glitter status, If so,
please recharge battery power immediately.
Q2 : Hama KEY2GO X1000 connect with iDevice successfully but it is still not working:
1.Please make sure does batter power is fully enough for working, you can check LED3 status, if it blink during
