background image

6

7

5. DIP SWITCH OPERATION: 

The 4-pin DIP switch on the front panel of the unit is used for EDID 
management and HDCP management. It represents 

“0”

 when in the 

lower 

(OFF)

 position, and it represents 

“1”

 while putting the switch in 

the upper (ON) position.

Switch 1~3 are used for EDID setting. The switch status and its corresponding setting are 
shown at the below chart.

Switch 4 is used for HDCP setting. The switch status and its corresponding setting are shown 
at the below chart.

Switch 4 Status

HDCP

OFF (0)

Automatically follows the HDCP version of display device. 
When display device has no HDCP, if source device have no HDCP 
content, the video output has no HDCP content; if source device has 
HDCP content, there are no video output.

ON (1)

Automatically follows the HDCP version of source device.

Note:

 The factory default switch status is “0000”, and it needs to be set to “1111” when enable 

RS232 control to set EDID and HDCP.

6. RS232 CONTROL

Connect the RS232 port to control device (e.g. PC) with RS232 cable. The splitter can be 
controlled by sending RS232 commands.

RS232 Commands

The command lists are used to control the splitter. The RS232 control software (e.g. 
docklight) needs to be installed on the control PC to send RS232 commands.
After installing the RS232 control software, please set the parameters of COM number, bound 
rate, data bit, stop bit and the parity bit correctly, and then you are able to send command in 
command sending area.

Baud rate: 9600 
Data bit: 8
Stop bit: 1
Parity bit: none

Note:

• 

All commands need to be ended with “<CR><LF>”.

• 

In the commands, “[”and “]” are symbols for easy reading and do not need to be typed 
in actual operation.

• 

Type the command carefully, it is case-sensitive.

Switch Status

(PIN 1-3)

EDID Value

1

2

3

0

0

0

Obtains EDID from the first detected display starting at HDMI OUT-
1>OUT2>.........>OUT16.

0

0

1

1920x1080@60Hz 8bit Stereo

0

1

0

1920x1080@60Hz 8bit High Definition Audio

0

1

1

3840x2160@30Hz 8bit Stereo Audio

1

0

0

3840x2160@30Hz Deep Color High Definition Audio

1

0

1

3840x2160@60Hz Deep Color Stereo

1

1

0

3840x2160@60Hz Deep Color HDR LPCM 6CH

Reviews: