SP-1X2SL18G
4
Product Introduction
Thanks for choosing the HDMI 2.0 1x2 Splitter, which can distribute one HDMI input to two
outputs. The splitter supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080P 3D, and
multichannel audio formats. Besides passing EDID information from the display, there are
multiple built-in EDID settings can be selected by the 4-pin DIP switch on the front panel.
Moreover, the splitter supports convenient firmware upgrade through Micro-USB port.
Features
l
Supports HDMI 2.0 and the video resolution up to 4K@60Hz 4:4:4.
l
HDMI input supports HDCP 2.2 and the outputs support HDCP Active or HDCP Passive
mode.
l
Supports video resolution down-scaling, the 4K input can be automatically degraded to
1080P output for compatibility with 1080P display.
l
18Gbps high bandwidth.
l
Advanced EDID management: multiple built-in EDID settings can be selected.
l
Built-in equalizer for signal enhancement to avoid signal attenuation in transmission.
l
Supports CEC pass-through.
l
Provides LEDs to indicate the current operating status.
l
Firmware upgrade by Micro-USB port.
Panel Description
Front Panel
①
POWER LED:
The LED illuminates red when power is applied.
②
INPUT LED:
The LED illuminates blue when there is HDMI input.
③
OUTPUT LEDs:
The LED illuminates blue when there is HDMI output on the
corresponding
channel.
IN
FW
1
2
1 2 3 4
EDID
ON
OFF
1
0
1 2
3
4
5
