Step 2: Attach Front Wheel Assembly
to Chassis
Step 1: Attach Rear Wheels to Chassis
Free Wheeling Mode
Free-wheeling allows the rear wheels to turn freely without engaging
drive train. If you need to pull or push your caddie without power,
always put it in Free-Wheeling mode first. This prevents strain on
gears.
Push release button on outside of wheel. Slide wheel outward slightly
on the axle. Release button to allow it to lock in the proper groove.
When the hub is locked onto the free-wheel groove, the wheel will not
slide off.
• Remove protective covers from main axle.
• On outside of rear wheels, locate and push wheel release button.
• Place wheel on axle, aligning drive pins on axle with four holes in
wheel panel.
• Open draw
latch under
battery tray.
• Insert front
wheel
assembly
into
hole in front of
battery tray
and secure
draw latch.
Push wheel release button.
Insert wheel on axle by
aligning drive pins.
