Kangaroo Golf Z 2020 Series Quick Start Manual Download

Page: 1 / 7

2020 MODEL

Quick Start Guide

Step 1: Attach Rear Wheels

•

Remove protective covers from main axle.

•

On outside of rear wheels, locate and push wheel release button.

•

Place wheel on axle, aligning drive pins on axle with four holes in
wheel panel.

Handle

Assembly

CaddieCommand

Remote Guidance

Upper Bag

Support

Rear Quick-Release

Wheels

Chassis

Steering

Structure

WITH QUICK-RELEASE WHEELS

Your Kangaroo Z-series will arrive in five separate pieces. They are the

handle, chassis, rear quick-release wheels and steering structure.

Summary of Contents for Z 2020 Series

Page 1: ... wheel on axle aligning drive pins on axle with four holes in wheel panel H a n d l e A s s e m b l y CaddieCommand Remote Guidance Upper Bag Support Rear Quick Release Wheels Chassis Steering Structure WITH QUICK RELEASE WHEELS Your Kangaroo Z series will arrive in five separate pieces They are the handle chassis rear quick release wheels and steering structure ...

Page 3: ... Attach wire plug to receptacle on backside of Z box Remove three plastic tie wrap bands from handle Inserting handle assembly into chassis Attach wire from handle to back of Z box Be sure to unplug wire from Z box before removing handle assembly to avoid damage Be sure to twist collar when attaching and detaching wire ...

Page 4: ... battery tray and plug in specially designed T bar Set speed control all the way down set the function switch to MANUAL and slowly adjust control to increase speed Function Switch Speed Control SET is recommended speed in remote mode Connecting T bar to battery Make sure T bar is solidly connected matching positive to positive and negative to negative ...

Page 6: ...th black alignment knob Toggle function switch to remote Turn alignment knob on front of Z box until front wheel is back to center Upper Bag Support is adjustable to accommodate height of your golf bag Use provided 5 32 allen wrench to detach and reattach clamp at desired position ...