19
Routine Care and Maintenance
Like any piece of mechanical equipment, your Z-series will benefit from a small amount of
care and making sure that others who handle it know what to do.
Lubrication
In general, your Z-series will not need lubrication. This is assisted by keeping it clean of
dirt and debris. If you feel it’s necessary, use only a silicone or Teflon based product. Oil
based products such as WD40 will attract dirt and make problem worse. Clean anything
you can access before applying lubrication.
Keep it Dry and Clean
It goes without saying that you should not drive your Kangaroo into a water hazard, even
though there have occasionally been stories of one surviving such treatment.
If you do get the
CaddieCommand
remote or the
Z-box
wet, treat it like you would your
mobile phone, dry off what you can and put it in a container with an absorbent material
such as uncooked rice.
Periodically clean out plugs and receptacles by blowing
out debris and dirt with electronic device canned air.
Looking Good
Your Z-series will always look its best with occasional
cleaning. Finished components can be cleaned with
soap or mild detergent and water, being especially
careful to keep electronic and electric components
and plugs dry. A good quality automative wax will make the task easier and keep stainless
and finished surfaces clean longer. Tires may become too slippery if cleaned with some
cleaners. DO NOT hose down or pressure wash your caddie!