7
6
Runaway and Circuitry Protection:
The Model 5 will automatically shut itself off if the switch is left ON for an excessive period of
time. The reason for this is to shut it off in a possible runaway situation. This also allows the
solid state circuitry a cool-down period. To avoid activation of this safeguard, turn OFF the rocker
switch each time you stop. Merely turning the speed all the way down will not reset this internal
timer and will cause the Model 5 to unexpectedly shut off. If you forget, and your motorcaddie
unexpectedly “cuts out” or is “dead”, turn the ON-OFF switch to OFF and then back ON to restart.
Controls
ON-OFF
Rocker
Switch
Speed Control
ON-OFF Switch:
The ON-OFF switch, located top center of the handle, is self-explanatory in operation. It is located
for convenient access in starting or stopping your Model 5.
Speed Control and Operation:
Speed is controlled by the rotary thumb-wheel located between the handle grips. The speed control
decal indicates speed in relation to the thumb-wheel position.
Note:
Turning the speed control all the way down doesn’t turn off controls, even if your motorcaddie
isn’t moving.
There is a feature, known in technical terms as “ramp up”, that automatically provides a gentle start
at any setting up to, and including, full speed. Even so, your Model 5 is very powerful, and it’s best
to start out at lower speeds, at least until you become familiar with the motorcaddie.
Normal Operation:
1. Turn dial to desired speed setting
2. Turn ON-OFF switch to ON. You can vary the speed control to suit your own walking pace.
3. To stop, turn ON-OFF switch to OFF. There’s no need to change the speed control when stop-
ping and re-starting.
Scorecard
Platform
