15
PAGE
Repair Instructions
K 350
Mounting the
SDS-plus
Reception
1
Insert the spring (61) and the support
plate (63).
2
Depress the support plate (63) and insert
the ball (62).
3
Fit the retaining ring (64) and the sliding
sleeve (87).
4
Fit the spacer (60).
5
Push down the sliding sleeve (87) and fit
the rubber (A).
Mounting the
carbon brushes
1
Insert the brush holder (15) into the hous-
ing and connect the cable to the field.
2
Insert the carbon brush (88) into the brush
holder (15) and put the spring (A) onto the
carbon brush. Fit the flat plug.
3
Fasten the service cover (9) with the
bolts (85).
☞
From date of construction 03/99, the
carbon brush connection is located di-
rectly on the field.
60
87
64
62
63
61
A
15
88
A
15
88
9
85
03/99
➞
➞
03/99
16
Summary of Contents for K 350
Page 1: ......
