background image

27

4.  Press the UP or DOWN button to navigate through each track on the audio CD. Press the ENT button 

to select the track you want to include on your mix. 

Total:  0 

Trk 

  0m : 00s

     Track  1  4m : 31s

Once a track is selected, you will see an asterisk symbol 

(

*

) appear to the left of the track number. Press the ENT 

button again to deselect the track.

Note: 

If the track you have selected will cause the total 

playtime to exceed your blank CD-R media capacity, 

you will see an 

Over Blank Disc Capacity 

screen. Press 

the ENT button to return to the track selection menu. 

The last track selected will be de-selected automatically.

Over  Blank  Disc  Capacity

Press  OK  to  Continue

5.  Once you have finished selecting the tracks for this Audio CD, press the UP or DOWN button until 

you see the 

Are you done?

 screen. Press the ENT button to confirm your selection. 

Total:  6 

Trk 

26m : 17s

Are  you  done?

The Mix process will begin and you will see the 

Mix Progress

 screen:

Mixing  

 

 

      1

10%   

 

          04:31

• 

1

- the system is currently transferring track 1.

• 

10%

 - the current track is 10% complete.

• 

04:31 

- current track’s running time.

6.  Once the mixing process is completed, you can choose to either continue adding tracks from another 

audio CD or finalize the CD:

Finalizing...

Please  Wait

Total:  6 

Trk 

26m : 17s

Finish  Mixing?

Total:  6 

Trk 

26m : 17s

Insert  Next  Master?

a.  If you want to add tracks from a different audio CD, 

press the UP or DOWN button to select 

Insert Next 

Master

. Press the ENT button and the audio CD will 

automatically be ejected. Insert the next audio CD 

and repeat steps 4 - 6 to continue adding tracks. 

b.  If you are finished adding tracks to the list, press 

the UP or DOWN button to select 

Finish Mixing. 

Press the ENT button and you will see the 

Confirm 

to Finalize 

screen. Press the ENT button to confirm 

that you are ready to finalize the CD. 

The audio CD will be automatically ejected and you 

will see the 

Finalizing

 screen.

7.  Once the Finalizing process is completed, you will see the following screen. You can then press the 

ENT button and you will exit to the Main Menu. Your Mix Audio CD will be ejected.

Mix Audio Tracks

Summary of Contents for BR-DUPE


















































































Reviews: