Connect all the towers together using the provided Daisy Chain cable (referred to as DC cable).
a. Starting with the Master tower, connect the blue end of the DC cable to the blue diasy chain port
on the back of the tower.
b. Connect the black end of the DC cable to the black port located on the back of Duplicator #2.
c. To connect the next duplicator in the chain, use another DC cable and connect the blue end to the
blue port on Duplicator #2 and the black end to the black port on Duplicator #3. Continue in this
fashion until all duplicators are connected.
3. Connect the duplicators to electrical outlets using the provided power cables.
4. Power on all duplicators. They have not been linked at this point, so they will operate independently.
5. On each duplicator, navigate the main menu to “9. Setup” and then press the
ENT
button.
6. On each duplicator, navigate the Setup menu to “3. DC Link Setup” and then press the
ENT
button.
7.
Set Duplicator #1 to “First”. Press the
ENT
button.
8. Set the last duplicator in chain to “End”. Press the
ENT
button.
9. Set any duplicators in-between to “Middle”. Press the
ENT
button.
Duplicator #3 (End)
Duplicator #2 (Middle)
Duplicator #1 (First)
10. Power cycle all duplicators by switching the power switch off and on.
When the duplicators bootup and reach the “Detecting Links...” screen, the connected duplicators will attempt to
communicate with each other and establish the daisy chain connection.
Duplicating in a Daisy Chain Configuration
1. Navigate to “Copy” and press the
ENT
button.
2. Set a Copy Counter if desired. Press the
ENT
button.
3. Insert your Master disc into the drive labeled “Master (Source)” on the Master tower. Or select the
drive image loaded to the internal hard drive on the Master tower.
4. Insert your blank media into all remaining drives on all towers.
5. Press the
ENT
button. The duplication process starts.
For detailed information about using your Kanguru DVD Duplicator, please refer to the user manual which can
be downloaded from Kanguru’s support site
support.kanguru.com
.
The Kanguru DVD Duplicator is guaranteed to be free from defect in materials and workmanship for one year. Kanguru Solutions does
not offer money back returns on its duplicator product lines due to the unique nature of the product. If you experience any problems using
your Kanguru DVD Duplicator or have any technical questions, please call our technical support department. Our tech support is free
and available Monday through Friday, 9am to 5pm EST. Call 1-508-376-4245 or visit our website at www.Kanguru.com
Kanguru Solutions assumes no responsibility for the illegal distribution of copyright protected material.
04.01.12 v1.1 © 2012 Kanguru Solutions
