6
2.1.4 Running KDM on Red Hat Enterprise Linux 5
Only the following Defender flash drive models are supported on Red Hat Enterprise Linux 5:
•
Defender 2000
•
Defender Elite200
Note:
You must have Super User or Root privileges in order to run KDM on Red Hat Enterprise Linux 5.
To run KDM from the Red Hat Enterprise Linux 5 operating system, connect your Defender flash drive
to your computer through a USB port. A CD icon named ‘KDM’ will appear on the desktop. If the KDM
window doesn’t open automatically, double click on the
KDM
icon
to open it.
From the window that opens, copy the
kdm_exec.sh
shell script file
to a location on your computer’s
local hard drive.
Once the kdm_exec.sh
shell script has been copied to a local hard drive, you can execute KDM
through the Terminal:
1. Open the Terminal window by clicking on
Applications
→
Accessories
→
Terminal
. The Terminal
location may be different depending on which version of Red Hat you are running.
2. From the Terminal, navigate to the directory where you copied the kdm_exec.sh shell script file to.
3. Type, “chmod 007 kdm_exec.sh” to allow full execute permission.
4. Type, “./kdm_exec.sh” to execute the shell script.
○
If it is your first time running KDM you will need to complete the setup wizard in order to set
your security password (see section
2.2 The Setup Wizard on page 7
).
○
If you have already setup your security password, you will be prompted to login (see section
2.3
The Login Window on page 13
).
Running Kanguru Defender Manager
