background image

 
 
 

 

 

 

 

USER’S MANUAL

 

 
 

  

 

 
 
 
 

                                         

 

FCC COMPLIANCE STATEMENTS 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
Reorient or relocate the receiving antenna. 
Increase the Distance between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
Consult the dealer or an experienced radio/TV technician for help. 
 
 
 

 

 

TRADEMARKS 

 
MS-DOS, Windows, Windows 98/2000/ME/XP are trademarks of Microsoft Corporation. 
Macintosh and Mac are trademarks of Apple Computer 

*All of the third-party brands and names are the property of their respective owners.

Summary of Contents for Dock













Reviews: