13
4. DEFINING COPY AND/OR COMPARE
Before performing a duplication, take a moment to define the SET COPY and SET COMPARE
options under the SETUP menu. These options will tell the duplicator how the FULL and BRIEF
modes will operate.
4.1 Set Copy Functionality
When SET COPY is enabled BRIEF, RESIZE and FULL modes will execute a Copy process. The
SET COPY option is enabled by default.
To change the SET COPY option:
1. From the Main menu,
hold
the ‘SET’ button to enter the SETUP menu.
2.
Tap
the ‘SET’ button to navigate to the SET COPY option. It is marked with an asterisk by
default, signifying that copy functionality is currently enabled.
3.
Tap
the ‘RUN’ button to toggle whether copy functionality is enabled or disabled.
SETUP
>[ ] SET COPY
*
4.2 Set Compare Functionality
When SET COMPARE is enabled BRIEF and FULL modes will execute a Compare process,
comparing the data between the Source and Target drives and confirming that they are identical. The
SET COMPARE option is disabled by default.
To change the SET COMPARE option:
1. From the Main menu,
hold
the ‘SET’ button to enter the SETUP menu.
2.
Tap
the ‘SET’ button to navigate to the SET COMPARE option. It should not be marked by
default, signifying that compare functionality is currently disabled.
3.
Tap
the ‘RUN’ button to toggle whether the option is enabled or disabled.
SETUP
>[ ] SET COMPARE
*
Note:
The Compare process cannot be run with RESIZE mode.
4.3 Set Copy & Compare Functionality
Both the SET COPY and SET COMPARE options can be enabled at the same time. When both
options are enabled BRIEF and FULL modes will execute a Copy & Compare process, copying the
data from the Source to the Target drives and then comparing the data on all drives to ensure that they
are identical.
Defining Copy and/or Compare
