24
7.6 Format Source
The FORMAT SOURCE operation allows you to format a hard drive as a Storage Center. Storage
Centers can be used to store hard drive images for convenient access to your most commonly used
Source files. For more information on using a Storage Center see section 5.2 Duplicating From a
Storage Center on page 15.
To format a hard drive as a Storage Center:
1. Connect the hard drive you want to format as a Storage Center to the side of the duplicator
labaled “SOURCE”.
2. In the Advanced Setup menu, navigate to FORMAT SOURCE and then
tap
the ‘RUN’ button
to format the hard drive.
3. You will receive a message asking you to confirm formatting the drive.
Tap
the ‘RUN’ button
to proceed or
tap
the ‘SET’ button to cancel.
Caution!
Formatting the hard drive will erase any data stored on the hard drive.
Once the format has completed you will receive a message confirming that the format was successful.
Format Source
