28
8.7 Skip Read Error
The SKIP READ ERROR option allows you to enable or disable error skipping during FULL, BRIEF
and RESIZE modes.
Tap
the ‘RUN’ button to change this option.
•
[ ]
– Disabled (default). When an error is detected while reading from the Source, the duplicator
will cancel the current process.
•
[
٭
]
– Enabled. When an error is detected while reading from the Source, the duplicator will
skip the bad sector on the Source and fill it with a zero on the Target.
8.8 Load Full Image
The LOAD FULL IMAGE option allows you to control how image files are saved to a Storage Center
during a Load operation (see section 6.4 Load on page 21).
Tap
the ‘RUN’ button to change this
option.
•
[ ]
– Disabled (default). The system will analyze the Source’s file system before building the
image. If the Source’s file system is recognized as FAT/ NTFS/ EXT1/ 2/ 3/ 4, the image will be
a Brief image based on the file system and data area. If the Source’s file system is unrecognized
the image will be a Full sector by sector image.
•
[
٭
]
– Enabled. When executing a Load process, the system will not analyze the Source’s file
system and will automatically build a Full sector by sector image.
8.9 Total Copy Count
TOTAL COPY COUNT keeps track of the total number of successful and unsuccessful duplications
produced by the system. This is a running count that includes all copy modes.
Tap
the ‘RUN’ button
to view the total copy count.
Skip Read Error / Load Full Image / Total Copy Count
