background image

30

8.  WarraNTy INForMaTIoN

This product carries a 1 year* limited warranty on the power supply, controller, and all internal 

components. Kanguru Solutions is not responsible for any damages incurred in the shipping process. 

Any claims for loss or damage must be made to carrier directly. Claims for shipping errors should be 

reported to Kanguru Solutions within three (3) working days of receipt of merchandise.  Please refer 

to the RMA Procedure section of this manual if your duplicator needs servicing.

Kanguru Solutions does not offer money back returns on its duplicator product lines due to the 

unique nature of the product.  all units will be fully supported under manufacturer’s and/or 

extended warranty plans.

9.  TEChNICaL SUPPorT

If you experience any problems using your Kanguru product or have any technical questions regarding 

any of our products, please call our tech support department. Our tech support is free and available 

Monday thru Friday, 9am to 5pm EST. 

Call 1-508-376-4245 

Or visit our website at www.Kanguru.com 

rMa Procedure

all Duplicators being serviced MUST bE PaCKED IN ThE orIGINaL PaCKaGING. 

If 

you do not have your original packaging, you can purchase replacement packaging for $25.00 from 

Kanguru’s Tech Support Department. Kanguru Solution’s warranty will not be honored in the event 

that a duplicator is received improperly packaged, altered, or physically damaged.

STEP oNE: Call for a rMa Number: 508-376-4245

Duplicators will not be accepted for repair without a valid RMA number. RMA numbers are valid for 

30 days upon assignment. Any return without a valid RMA number will be returned to the customer 

at their expense.

STEP TWo: Ship and Insure your Duplicator

Kanguru Solutions strongly recommends you fully insure the duplicator for shipping. Kanguru 

Solutions is not responsible for if the package is lost or damaged in transit.  We suggest using a 

shipping company that utilizes a “tracking” feature to verify “proof of delivery.”  The customer is 

responsible for shipping charges when returning a product. Shipping back to the customer is covered 

by Kanguru Solutions during the first 90 days of purchase.  After 90 days of purchase the customer is 

responsible for shipping both ways.

Warranty Information / Technical Support

Summary of Contents for kclone-5hd-twr
































Reviews: