Kanguru
Slim FC-RW
- 28 -
7. Troubleshooting
When I attempt to install the Kanguru FCRW on my Windows 2000 PC, my
system crashes during the install process.
You may need to install a new set of USB2.0 drivers from Microsoft. Please refer
to the installation section of this manual for detailed instructions.
When I connect the Kanguru FCRW to my PC I only have access to the CD-
RW drive but not the Card Reader.
If you are using Windows 98 or 2000 you will need to install drivers to use the
card reader. If you have installed these drivers and you are still having problems,
use device manager to update the correct drivers.
It seems my flash cards do not fit in the card reader?
Please make sure that you have the cards properly aligned with the card reader’s
slot. Use the images pictured on the front of the drive for guidance.
Error Codes
•
Code 1:
No Disc is detected
•
Code 2:
No Flash Card is detected
•
Code 3:
Read Flash Card error
•
Code 4:
Buffer error
•
Code 5:
CD is already closed
•
Code 6:
Not enough free space on disc
•
Code 7:
Write fail
•
Code 8:
Write pre-gap error
•
Code 9:
Write DVD error
•
Code 10:
CD not erasable
•
Code 11:
Erase fail
•
Code 12:
Device not ready
•
Code 13:
Verify Fail—Read Flash Memory Card Error
•
Code 14:
Verify Fail—Read Disk Error