background image

 

  

User Manual BB1/070/1 

 

 

Page 6 of 12 

 

5 Cleaning and Maintenance 

 

 

Recommended controls  Executed by 

Time schedule  Additional information 

Cleaning of the bed 

User 

Hospital routines  Use a surface cleaning and 

disinfecting agent recommended 
by your internal hygienist. 

Note: KANMED Baby Warming 

Bed must under no 

circumstances be showered with 
any fluid. 

Do not clean it in disinfecting 

chambers. 

Cables and connectors 

User 

Every day 

Make sure that they are in good 

condition.  

Mattress 

User 

Hospital routines  See label on Mattress edge 

Tent 

User 

Hospital routines  See label tent 

Kanmed Babywarmer  

User 

 

See Kanmed Babywarmer user 
manual 

Control of functions and 

adjustments. 

Technician 

At least once a 

year 

See service section 

 
 

 

 

6 Trouble shooting 

 
 

Symptom 

Possible cause 

Action 

No mains 

Check the cables. 
 

Something blocking the 

movement 

Check that nothing blocks 

The lifting column does not move 
as wanted. 

(not for BB-3) 

Electrical connection broken or 

not properly connected 

Technical service 

Control is out of order or needs 
adjustment 

Technical service 

You can not tilt the bed properly. 
It gets stuck in utmost positions. 

It does not keep the position 

Something is blocking it 

Check that nothing blocks 

it 

Bed feels unstable 

Loose screws or wheels 

Technical service 

Height adjustments makes 
unusual noises 

 Technical 

service 

 

7 Warranty Statement 

 

KANMED warrants the purchaser that the Babybed is free from defects in materials and workmanship for a period of 
12 month from the date of delivery. 
The sole obligation of KANMED with respect to any such defect is limited to the repair with new or re-manufactured 
parts or, at the discretion of KANMED, replacement of the equipment or refunding of the purchase price. 
This warranty shall not apply if the product has been modified, adjusted or repaired other than by KANMED or by 
organisations authorised by KANMED or modified, adjusted or repaired not in accordance with written instructions 
provided by KANMED. Neither shall the warranty apply if the equipment has been subject to misuse, negligence or 
accident.  
These warranties are made on the condition that prompt notification of a defect is given to KANMED or its authorised 
dealers within the warranty period. 
KANMED shall have the sole right to determine whether a defect exists. 
KANMED shall not in any case be liable for special or consequential damages arising from the breach of warranty, 
reach of contract, negligence or any other legal theory. 

Summary of Contents for B-1













Reviews: