Kanmed BABYBED BB100 User Manual Download

Page: 17 / 20

User Manual BB100-400 /070

Page 17 of 20

10 Spare parts/Accessories

NOTE: Many other accessories and spare parts are available. Please check with your local
supplier or on the Kanmed webpage

www.kanmed.se

Please contact your supplier for a

price list.

Part no

Description

Remark

BB106

Rear mount kit standard bed

Complete kit incl holder for BW3

BB107

Rear mount kit twin beds

Complete kit incl holder for BW3

BB108

Conversion kit

Converts BB100/300 to BB101/301

BB109

Conversion kit

Converts BB400/400F to BB401/401F

800-0077

Side Wall left/right BB100/BB300

29 cm height.

800-0076

Side Wall front BB100/BB300

29 cm height.

800-0010

Side Wall rear BB100/BB300

29 cm height, Grooves for tubing

800-0101

Side Wall left/right BB101/BB301

25 cm height.

800-0100

Side Wall front BB101/BB301

25 cm height.

800-0105

Side Wall rear BB101/BB301

25 cm height, Grooves for tubing

800-0079

Side Wall left/right BB400/400F

29 cm height.

800-0078

Side Wall front BB400/400F

29 cm height.

800-0042

Side Wall rear BB400/400F

29 cm height, Grooves for tubing

800-0107

Side Wall left/right BB401/401F

25 cm height.

800-0108

Side Wall front BB401/401F

25 cm height.

800-0109

Side Wall rear BB401/401F

25 cm height, Grooves for tubing

800-0074

Side Wall Guide Left side

Set of 4

800-0073

Side Wall Guide Right side

Set of 4

800-0072

Red side wall stopper

Set of 4

800-0023

Side Rail front/rear BB100/BB300

Length 40cm

800-0022

Side Rail sides BB100/BB300

Length 62 cm

800-0044

Side Rail front/rear BB400/BB400F

Length 57,7 cm

800-0045

Side Rail sides BB400/BB400F

Length 72,3 cm

800-0011

Corner handle for Side Rail beds

With side wall guides

800-0110

Corner handle BB100-400 (May 2017)

With side rails. No guides

800-0098

Corner BB101-401

Without side rails

700-0880

Screws for Corner Bracket

Use only these special screws

BB155

Mattress BB100/BB300 68 cm x 46 cm

Plastic covered foam

BB450

Mattress BB400/BB400F 76 cm x 64 cm

Plastic covered foam

800-0004

Baby Tray BB100/BB300

800-0041

Baby Tray BB400/BB400F

800-0002

Storage Box

800-0013

Storage Box holder

Includes set of bolt pin and screws

800-0001

Storage Box lid

BB171

Bottle holder

Not yet available

800-0065

Bracket for DIN rails (fits the Side Rails)

Not yet available

800-0020

Tent Pole for all beds

Two height positions

800-0057

Bracket/handle for BW3

800-0502

Special power cable for BabyWarmer

Length 80-100cm

800-0003

Wheel top Cover

BB160

Tent for BB100/101 / BB300/301

BB460

Tent for BB400/401 /400F/401F

800-0501

Foot Pedal with cable

800-0029

Bolt pin for accessories
(that are to be fixed on the Pillar)

Dia 7 mm, L 30 mm Screw M5.
Including the screws. Set of 2

800-0503

Label Bed tray

800-0501

Label Foot pedal

BB103

Trendelenburg kit ±17 degrees

New gas spring and top plate

Summary of Contents for BABYBED BB100





















Search results

Summary of Contents for BABYBED BB100

Reviews:

Related manuals for BABYBED BB100

Brands by name

Popular brands

Kanmed BABYBED BB100, User Manual

Search results

Summary of Contents for BABYBED BB100

Reviews:

Related manuals for BABYBED BB100

Brands by name

Popular brands