User Manual BB100-400 /070
Page 7 of 20
4.7 Tilting
When tilting the Bed, hold the front Rail or Handle firmly by both hands and press the release
button under the right Corner.
At the same time, press the Bed down or pull up till the desired tilt is achieved. When
releasing the button the bed should stay in the desired position/angle.
Max tilt angle can be limited by a technician. See technical section.
A kit is available to upgrade the tilt function to + and
–
17 degrees, Trendelenburg position.
Art no BB173.
4.8 Tent Pole, Tent and Mattress
Mount the Tent Pole in the rear bracket.
Turn it to a 90 degree angle from the Bed and
press it down so the screws can pass in the groves.
The Tent has a channel inside.
Thread the Tent Pole into the channel in order to
secure it and place the Tent sides on the outside
of the Side Walls.
Place the Mattress in the Bed.
Other mattress types and homemade tents
may void Kanmed legal responsibility.
NOTE: The tent pole has 2 height positions.
Please make sure you use the right tent pole.
Tilt release button on models
without side rails
Tilt release button on models with
side rails
Stop screw position B100/101/300/301
Stop screw position Twin bed versions
