User Manual
BW3-070/4
Page 25 of 28
Connection to battery
If the Control Unit is to be connected to a battery (12V DC, from a vehicle etc.) use
the Kanmed Battery Cable BW3-007 that increases the voltage to 24V DC. Connect
the battery cable to the Battery inlet below the Heating Pad connector on the Control
Unit. Connect the other end (fitted with a DIN 4165 plug) to the vehicles cigarette
lighter socket or similar outlet.
If the Control Unit is powered directly from a 24 V battery source, then note that the
centre pin of the DC power inlet is
+
(positive).
Make sure that the power outlet is able to supply minimum of 3 A DC.
(The 2,5/5,5 mm power inlet of the BW3 Control Unit is internally fuse-, and polarity
protected.)
Modifications
Any modifications on the Control Unit, Heating Pad, Gel- or Water Mattress will void
Kanmed
’s responsibilities totally and are not allowed without the written consent of
Kanmed.
12 Warranty
Kanmed warrants the purchaser that the Control Unit BW3 and/or Heating Pad BW3-003 are free from
defects in material and workmanship for a period of 12 month from the date of delivery.
The Kanmed Baby Nest, Water and Gel Mattresses and other associated parts are warranted to be free of
defects at the time of delivery.
The sole obligation of Kanmed with respect to any such defect is limited to the repair with new or re-
manufactured parts or, at the discretion of Kanmed, replacement of the equipment or refunding of the
purchase price.
This warranty shall not apply if the product has been modified, adjusted or repaired other than by Kanmed
or by organisations authorised by Kanmed or modified, adjusted or repaired not in accordance with written
instructions provided by Kanmed. Neither shall the warranty apply if the equipment has been subject to
misuse, negligence or accident.
These warranties are made on the condition that prompt notification of a defect is given to Kanmed or its
authorised dealers within the warranty period.
Kanmed shall have the sole right to determine whether a defect exists.
Kanmed shall not in any case be liable for special or consequential damages arising from the breach of
warranty, breach of contract, negligence or any other legal theory.
13 Disposal
When the Kanmed BabyWarmer have reached end of life, it should be recycled in accordance
with the EU 2002/96/EC (WEEE) directive if applicable.
